Omron CP1H Data Control Instructions

The data control instructions in the Omron CP1H programmable logic controller are used to manipulate the outputs based upon control conditions. Control is the main purpose of these instructions within the PLC. Instructions include PID (Proportional, Integral and Derivative), PID with Auto tuning, Dead Band Control, Limit, Dead Zone Control, Time Proportional Output, Scaling, etc.
We will be looking at some of these instructions in the Omron CP1H PLC. Examples of the instructions will be presented. Continue Reading!

Implementing the Solo Process Temperature Controller

The SOLO Temperature Controller is a single loop dual output process temperature controller that can control both heating and cooling simultaneously. It is available in 1/32, 1/16, 1/8 and 1/4 DIN panel sizes and is UL, CUL and CE approved. The name of temperature controller is deceiving. This unit will also accept voltage and current into them, which is great for process control.

Recently I was asked: How you can change the pressure value from PSI to Bar?

They were bringing into the controller a voltage signal. This can be scaled using the tP-H (High level signal) and tP-L (Low level signal). The units on the display scaled for you. The default is -999 to 999. See section 11-2 of the following information guide that comes with the controller. Continue Reading!

Omron CP1H Table Data Instructions

The Omron CP1H programmable logic controller has several different table data processing instructions. These instructions are used to handle table data, stacks and other ranges of data.
We can define a stack of data. With this data we can then do the following: add new data by pushing onto the stack, use FIFO (First In First Out), use LIFO (Last In First Out), find the current stack size and read, overwrite, insert or delete from the stack.
Dimension record tables are used to define the length of each record and the number of records. We can then write and read these records. This is ideal for data acquisition projects.
Other instructions found in the table data processing instructions include searching, summing and finding minimum and maximum values.
We will be looking at these instructions in the Omron CP1H PLC. Examples of the instructions will be presented. Continue Reading!

Omron CP1H Program Control Instructions

The Omron CP1H programmable logic controller has several different ways to control the program and the way in which your program executes. Sequence control, Subroutines, and Step instructions can be used. These are just a few ways in which the controller will execute your logic using a synchronous PLC scan. Understanding the PLC program scan will explain the synchronous and asynchronous program scanning.
Interlocks, Jumps, For Next Loops, Subroutines and Step instructions are some of the ways in which we can control our program in the PLC. We will be looking at some of these instructions in the Omron CP1H PLC. Examples of some of the instructions will be presented. Continue Reading!