C-More Micro HMI First Program Part 2

Previously we put our first program (Video) into the C-More Micro HMI Panel using the C-More Micro programming software. The Do-More Designer Simulator was used with a modified Start Stop Jog Circuit so we can use our HMI screen to control the output as well as the inputs on the PLC. This communication was done via Ethernet with the Modbus TCP protocol.

We will now look at PLC to Panel and Panel to PLC communications. This will allow us to control the screen page number, beeper and back light of the panel from the PLC. We will also get notification of the same as well as key press information from the HMI panel. Let’s get started. Continue Reading!

Productivity 1000 Series PLC Data Handling Instructions Part 1

Data handling instructions are used to perform movement and manipulations of the memory in the programmable logic controller. The Productivity 1000 Series PLC has fifteen different data handling instructions that can be used in a wide variety of applications. In this first part we will be looking at the following instructions:
Absolute Encoder (ABSE) – Encoder input using Gray Code or Binary Code
Compare Values (CMPV) – Compare two different tags and determine if equal, greater than or less than.
Copy Data (CPD) – Copy tags from one location and place in another.
FIFO / LIFO (FILI) – First in first out / Last in first out
First Bit On/Off (FIB) – Determines first bit on in a series of bit tags.
Inc / Dec (INC) – Increment or decrement a tag by a number.
Logical Bits (LOG) – Perform logical operations on Boolean input tags.
Logical Words (LOGW) – Perform logical operations on tags.
In part 2 of data handling we will continue with additional data handling instructions.
Let’s get started with the Productivity 1000 Series PLC data handling instructions. Continue Reading!

PLC Fiddle Basic Gate Ladder Logic

Last time we discussed the free virtual plc simulator called PLC Fiddle. It will enable you to create simple PLC ladder logic code within your browser. This is an ideal way in understanding PLC concepts for industrial automation. All of the basic PLC instructions that come with most plc units have been incorporated in this virtual PLC software.
http://accautomation.ca/plc-fiddle-online-editor-and-simulator-in-your-browser/
PLC Fiddle Video – This will demonstrate the basic functions of the PLC simulator.
Understanding and creating your own programmable logic controller programs in ladder can be fun. We will be starting with the basic gate logic circuits and convert these to ladder logic.
We will be looking at the AND, OR, NAND, NOR, EXOR and EXNOR logic circuits using PLC fiddle. This will get you involved in leaning and understanding PLC programming. Let’s get started. Continue Reading!

Productivity 1000 Series PLC Math Instructions

Math instructions are used to perform mathematical calculations. The Productivity 1000 Series PLC has math instructions that can be used in a wide variety of applications. We will be looking at the Data Statistics (DATA) and the Math Editor (MATH).

Your automation system that you implement may involve these instructions. As a system integrator you will require the use of these instructions in your commissioned programs.
Let’s get started with the Productivity 1000 Series PLC Math Instructions. Continue Reading!

Cofaso 7 PLC Design and Overview

Cofaso 7 is a computer aided engineering (CAE) solution software package. Its special system technology with direct access to applicable logic for each schematic allows industry design and documentation for all solutions. Electrical engineering project tasks will become easier with Cofaso 7. This parameter controlled system is available in 13 languages and supports all the common windows versions.
Cofaso 7 meets all global evaluation standards. It offers complete authoring and editing of electrical engineering documents. Some of the features in the package include: Cross-references, wiring lists, terminal diagrams, terminal connection diagrams, interconnect diagrams, PLC cross references, mounting plate design and more.

Cofaso provides flexible editing features:
XML, EXF and graphics interfaces such as DXF guarantee data interchange with other CAx systems and ensure the integration of cofaso into the unified production chain. Article data of any kind be imported or incorporated. An intelligent article number search function provides an additional aid to locating components used in the diagram.
We will be creating a PLC drawing with 5 outputs. These outputs will be connected to another box with the same reference numbers. We will also show the automated connection list. Anytime a reference name is changed all document items will change for that reference. Let’s get started. Continue Reading!

C-More Micro HMI First Program

We will now put our first program into the C-More Micro HMI Panel using the C-More Micro programming software. The Do-More Designer Simulator will be used with a modified Start Stop Jog Circuit so we can use our HMI screen to control the output as well as the inputs on the PLC.


The PLC logic for our circuit can be found on our post: How to Make a Start / Stop / Jog Circuit in a PLC. The YouTube video can be seen here.
Our C-More Micro HMI Panel will be communicating to the PLC simulator via Ethernet with the Modbus TCP protocol. Let’s get started. Continue Reading!