CTT Counter Timer Tachometer – Timer Modes

The CTT series from Automation Direct are multi-function digital units. They incorporate a multi-function digital counter, timer and tachometer all within the same unit. The timer mode will operate in twelve (12) different ways.
CTT Counter Timer Tachometer – Timer Modes
We will be looking at each of the timer modes on this versatile digital unit. Let’s get started.

Previously in this CTT Series – Counter / Timer / Tachometer we have discussed;
CTT Counter Timer Tachometer – Getting Started
o Un-boxing the CTT Video
o Powering up the Unit Video

All timer applications begin with a timing chart. The secret of using timers is a good place to start for a review of how timing charts work.
Programming these units can look like a hard task. The manual is over 260 pages! However, there is an easy way. The manual is broken up into chapters for each of the operation modes of the CTT. (Counter, Timer, Timer + Counter, Tachometer)
Once we find our operation mode, you look for the timing chart mode for your application. The manual includes all of the information that you need for that mode. This includes wiring diagrams, timing charts, program steps and dip switch settings.
ExampleSignal On Delay 1 timer mode – Page 3-4 and 3-5 contain all of the information needed to program this mode.

Signal On Delay 1 – CTT Timer Modes

On delay timer with momentary Start Input
CTT Counter Timer Tachometer – Timer Modes
Watch on YouTube : CTT Signal On Delay 1 Timer

Signal On Delay 2

On delay timer with maintained Start Input
CTT Counter Timer Tachometer – Timer Modes
Watch on YouTube : CTT Signal On Delay 2 Timer

Signal Off Delay – CTT Timer Modes

Off delay timer with momentary Start Input
CTT Counter Timer Tachometer – Timer Modes
Watch on YouTube : Signal Off Delay Timer

Signal On – CTT Timer Modes

Off delay timer with latching Start Input
CTT Counter Timer Tachometer – Timer Modes
Watch on YouTube : CTT Signal On Timer

Power On Delay – CTT Timer Modes

On delay timer when power is applied
CTT Counter Timer Tachometer – Timer Modes
Watch on YouTube : CTT Power On Delay Timer

Power On Delay Hold

On delay timer when power is applied and actual value storage on power loss
CTT Counter Timer Tachometer – Timer Modes
Watch on YouTube : CTT Power On Delay Hold Timer

Repeat Cycle – CTT Timer Modes

Repeating On delay timer
CTT Counter Timer Tachometer – Timer Modes
Watch on YouTube : CTT Repeat Cycle Timer

Repeat Cycle Hold Timer

Repeating On delay timer and actual value storage on power loss
CTT Counter Timer Tachometer – Timer Modes
Watch on YouTube : CTT Repeat Cycle Hold Timer

Repeat Cycle 2 

Repeating Off delay timer with separate on and off times
CTT Counter Timer Tachometer – Timer Modes
Watch on YouTube : CTT Repeat Cycle 2 Timer

Signal Cumulate – CTT Timer Modes

On delay timer with single start and pause input and actual value storage on power loss
Timing diagram
Watch on YouTube : CTT Signal Cumulate Timer

Signal Twin On Start 

Off delay timer with individual setpoints for Off and On times
Timing diagram
Watch on YouTube : CTT Signal Twin On Start Timer

Signal Twin Off Start 

On delay timer with individual setpoints for On and Off time.
Timing diagram
Watch on YouTube: CTT Signal Twin Off Start Timer

Summary of features – CTT Counter Timer Tachometer

– Can operate as a digital counter, timer, combination timer + counter or tachometer
– Accepts voltage and non-voltage inputs from a wide variety of NPN, PNP, or dry contact sensors
– Selectable counting speeds from 1 to 10,000 cycles per second
– Multiple transistor and relay outputs can operate as momentary or maintained
– Double-line, 6-digit, 2-color LCD display
– Easy configuration with externally accessible DIP switches or the lockable keypad
– Display decimal point selection
– Available in 100-240VAC and 24VDC powered models
– UL508 listed (E311366), cULus, CE marked

Counter, Timer, Tachometer – CTT Series from Automation Direct

Shop Multi-Function Digital Counter / Timer / Tachometer
CTT Overview
https://cdn.automationdirect.com/static/specs/cttcountertimertachoverview.pdf
CTT Quick Start Guide
https://cdn.automationdirect.com/static/manuals/cttqsg/cttseries_qsg.pdf
Digital CTT Manual
https://cdn.automationdirect.com/static/manuals/digitalctt/digitalctt.html
Rhino Power Supply
https://www.automationdirect.com/adc/Overview/Catalog/Power_Products_(Electrical)/DC_Power_Supplies
https://cdn.automationdirect.com/static/specs/pslpowersupplies.pdf

Next time we will look at the programming of the counter mode in the CTT.

If you have any questions or need further information please contact me.
Thank you,
Garry



If you’re like most of my readers, you’re committed to learning about technology. Numbering systems used in PLC’s are not difficult to learn and understand. We will walk through the numbering systems used in PLCs. This includes Bits, Decimal, Hexadecimal, ASCII and Floating Point.

To get this free article, subscribe to my free email newsletter.


Use the information to inform other people how numbering systems work. Sign up now.

The ‘Robust Data Logging for Free’ eBook is also available as a free download. The link is included when you subscribe to ACC Automation.


Leave a Comment