BRX Do-More PLC Analog IO – System Configuration

We will now configure and operate Analog inputs and outputs on our BRX Do-More controller. One of the features of the BRX Series PLC is the ability to expand its capability to fit your application. This is easily done by “snap-on” modules that will fit on the side of the BRX MPU (Multi-Processor Unit). As we have seen before in the BRX PLC System Configuration post we can add additional discrete inputs and outputs. Automation Direct now offers Analog Voltage and Analog Current input and output modules. These modules come as an 8 point channel unit. There is also a 4 point thermocouple input module also available. We will be configuring, scaling, and programming the Analog input and output Voltage modules for our BRX PLC. Let’s get started. More information can be obtained at our website. This includes all of the links mentioned in this video. https://accautomation.ca/brx-plc-analog-io-system-configuration 00:00 BRX Do-More PLC Analog IO – System Configuration 00:20 Configuring a BRX Do-More Series PLC 04:43 Hardware Module Installation – BRX Do-More Analog 07:36 Sample PLC Program – BRX Do-More Analog Setup Previously in this BRX Series PLC, we looked at the following: System Hardware http://accautomation.ca/brx-plc-system-hardware System Hardware Video https://youtu.be/wSYgY09VYeA Unboxing Video https://youtu.be/-Tf8m3BqzPo Installing the Software http://accautomation.ca/brx-plc-installing-the-software Installing the Software Video