Analog Input to a Solo Process Temperature Controller

The SOLO Process Temperature Controller is a single loop dual output process temperature controller that can control both heating and cooling simultaneously. It is available in 1/32, 1/16, 1/8, and 1/4 DIN panel sizes and is UL, CUL and CE approved. There are four types of control modes on the Solo. PID with autotune (AT), On/Off, Manual, and Ramp Soak. The video will show inputting an analog signal into the Solo Process Temperature Controller. We will scale the input signal for the display units that we want the analog to represent. We will be using the keypad on the controller to change values, but there is a configuration software provided free of charge by Automation Direct. Additional information can be obtained at our website. Here are the links mentioned in this video. https://accautomation.ca/solo-process-temperature-controller/ https://www.youtube.com/watch?v=rdDHNV_HAmA https://accautomation.ca/create-an-analog-voltage-input-tester-for-a-plc/ https://www.youtube.com/watch?v=SjgyiIEF7g8 Solo Operation Manual: https://cdn.automationdirect.com/static/manuals/solocontrolm/solocontrolm.pdf Automation Direct Website for Temperature / Process Controllers https://www.automationdirect.com/adc/Shopping/Catalog/Process_Control_-a-_Measurement/Temperature_-z-_Process_Controllers https://accautomation.ca/