Click PLC Real Time Clock (RTC) - Ladder Logic

The click plc has a real time clock that will allow us to control outputs based on the time of day. More information can be obtained on our website. This includes all of the links mentioned in this video. https://accautomation.ca/click-plc-real-time-clock This real-time clock (RTC) can be set from the click programming software or through the program of the controller. Our programs in the click can use the following calendar and clock values: SD19 – RTC Year – 4 digits (2021) SD20 – RTC Year – 2 digits (21) SD21 – RTC Month – (00 to 12) SD22 – RTC Day – (00 to 31) SD23 – RTC Day of the Week – 1 Sunday to 7 Saturday SD24 – RTC Hour – (00 to 23) SD25 – RTC Minute – (00 to 59) SD26 – RTC Second – (00 to 59) 00:00 Introduction 01:00 Hardware - C0-11DRE-D 01:47 Addresses (Address Picker - SD / SC) 04:30 Data View - Monitor RTC 05:11 Sample Program - Overview 05:46 Program - RTC - Testing 09:02 Program DST daylight savings time - Testing 15:01 Ending We will be using the RTC - Real Time Clock in a sample program. This program will turn on an output Monday to Friday from noon until 1 pm. It will also adjust for daylight savings time. Let’s get started. Previously we discussed: System-Hardware. https://accautomation.ca/click-plc-system-hardware/ Installing the Software https://accautomation.ca/click-plc-installing-the-software/ Establish Communication https://accautomation.ca/click-plc-establish-communication/ Numbering System and Addressing https://accautomation.ca/click-plc-numbering-system-and-addressing Click PLC Timers and Counters https://accautomation.ca/click-plc-timers-and-counters Compare and Math Instructions https://accautomation.ca/click-plc-compare-and-math-instructions Program Control Instructions https://accautomation.ca/click-plc-program-control-instructions Shift Register Instruction https://accautomation.ca/click-plc-shift-register-instruction Drum Instruction https://accautomation.ca/click-plc-drum-instruction Send and Receive Instructions https://accautomation.ca/click-plc-send-and-receive-instructions AdvancedHMI Communication https://accautomation.ca/click-plc-advancedhmi-communication Modbus RTU Click PLC Master to BRX PLC Slave Communication https://accautomation.ca/modbus-rtu-click-plc-master-to-brx-plc-slave-communication Video https://youtu.be/CIsj-Xppoog Update Firmware https://accautomation.ca/click-plc-update-firmware Video https://youtu.be/1X_kw4Rhokw HMI Rotary Encoder Dial Input https://accautomation.ca/click-plc-hmi-rotary-encoder-dial-input Video https://youtu.be/mix9k2RTdII High-Speed Counter - Part 1 https://accautomation.ca/click-plc-high-speed-counting-part-1 High-Speed Count Mode Video https://youtu.be/P3l34unyAyU Interval Measurement Mode Video https://youtu.be/-t8JSKruilE Duration Measurement Mode Video https://youtu.be/znF6PRwGq-Y Frequency Measurement Mode Video https://youtu.be/m0I9P5AoFqE Click PLC High-Speed Counter - Part 2 https://accautomation.ca/click-plc-high-speed-counting-part-2 External Interrupt Mode https://youtu.be/UxFffVddUt4 Pulse Catch Mode https://youtu.be/2H0zwul1X3o Filter Pulse Mode https://youtu.be/FNbYAkBwIsQ Frequency Measurement and High-Speed Count Mode https://youtu.be/qV3jgRszghE Analog Dusk to Dawn Program https://accautomation.ca/click-plc-analog-dusk-to-dawn-program https://youtu.be/JlxTBlk6IJY PID using Factory IO https://accautomation.ca/click-plc-pid-using-factory-io https://youtu.be/JGB9e__MWPc PID Instruction and Autotuning using Factory IO https://accautomation.ca/click-plc-pid-instruction-and-autotuning-using-factory-io https://youtu.be/QoMw1SGW-gA Logging Data with Time and Date Stamp https://accautomation.ca/click-plc-logging-data-with-time-and-date-stamp https://youtu.be/CQ5xa5UZPng Click PLC Modbus ASCII Protocol https://accautomation.ca/click-plc-modbus-ascii-protocol https://youtu.be/T4oiXG-XqL4 The entire Click PLC series can be found at this URL: https://accautomation.ca/series/click-plc/ There are several reasons why we are using the Click PLC. Here are just a few. - Investment is low for the hardware and the software is free - Standalone PLC with built-in I/O - Communication ability - Ethernet Port, RS232, RS485 - support for protocols such as Modbus RTU, Modbus TCP, etc. - Ability to expand the system with a variety of modules including RTD and Thermocouple inputs directly. https://www.accautomation.ca