Stride MQTT Gateway to Adafruit IO

We will use the Stride MQTT Gateway to Adafruit IO. The gateway will convert Modbus TCP and RTU protocol to MQTT. MQTT protocol is used for machine to machine (M2M), internet of things (IoT) communication. This publish/subscribe messaging is used where limited device resources are available or network bandwidth is low. The MQTT protocol provides small size, low power usage, minimized data packets, and efficient distribution of information to one or many receivers. The Stride MQTT Gateway is an industrial 4.0 hardware component (IIoT - Industrial Internet of Things) that provides isolation and can easily interface with existing Modbus RTU and Modbus TCP communication protocols. We will again be connecting a Stride MQTT Gateway to a Solo process temperature controller with Modbus RTU(RS485). The MQTT Gateway will communicate to the Adafruit IO Broker. The broker can display, log and allow us to control the data. This is done in an easily configured interface. Let's get started. More information can be obtained on our website. This includes all of the links mentioned in this video. https://accautomation.ca/stride-mqtt-gateway-to-adafruit-io Previous MQTT discussions can be found at the following location: BRX Do-More Simulator MQTT Publish-Subscribe https://accautomation.ca/brx-do-more-simulator-mqtt-publish-subscribe https://youtu.be/assMcr7caa8 BRX Do-More PLC MQTT Communications https://accautomation.ca/brx-do-more-plc-mqtt-communications https://youtu.be/Tjtrxh1K-b4 Stride MQTT Gateway Modbus RTU TCP https://accautomation.ca/stride-mqtt-gateway-modbus-rtu-tcp Stride MQTT Gateway Unboxing - Video https://youtu.be/A2ae7Sq3DRE Stride MQTT Gateway Modbus RTU TCP - Video https://youtu.be/jBNobfsBaVg