
Arduino Opta IoT PLC Quick Start Ladder Logic
Arduino Opta Quick Start Ladder logic. Every Opta IoT PLC comes with the ability to be programmed using the professional series Arduino PLC IDE. (Arduino PRO) This is designed to implement industrial machine control functions and programming, including ladder logic. The Opta hardware is also designed to support industrial voltages. This quick start guide will show you how to wire, initialize, license, and write your first ladder logic program in the Opta IoT PLC. A proximity sensor will be wired to the first input of the Opta PLC. Ladder logic will program the controller to turn on the first relay output when the proximity sensor is activated. Let's get started with this Opta quick start. Note: You do not have to purchase a software license for the Arduino PLC IDE when programming an OPTA controller. Detailed information about this post can be found on our website: https://accautomation.ca/arduino-opta-iot-plc-quick-start-ladder-logic/ 00:00 Arduino Opta IoT PLC Quick Start Ladder Logic 01:11 Wiring the Opta IoT PLC – Installing an input device 02:28 Connection to the Opta IoT PLC 05:07 Configuring the Tags 06:29 Tasks and What They Do 07:51 Opta Basic Ladder Logic Program (Quick Start) 09:57 Programming our Ladder Logic with Opta 11:35 Download our Ladder Program to the Opta Controller 12:14 Monitoring the Ladder Logic and Variables Arduino Opta IoT PLC Series https://accautomation.ca/series/arduino-opta-plc/ This contains the following highlighted posts and videos and more: