BRX Do-More PLC Media Access Control Address (MAC Address)

BRX Do-More PLC Media Access Control Address (MAC Address) The BRX Do-More PLC Media Access Control Address or MAC address is a unique number that can identify the device on your network. It is often used for assigning IP addresses by the DHCP (Router) on the web. This MAC address is also known as the PLC serial number. Using the Do-More Designer PLC programming software, there are three ways to view your MAC addresses in the BRX Do-More PLC. 1. Connect to the BRX Do-More PLC - The discoverable ports will be displayed. 2. The online system information screen will contain the MAC addresses. 3. System Data Structure Registers will display the MAC address. This can be viewed under Configuration | Memory | System | Structures | String or through the Data View monitoring using SerialNum name. - SerialNum Programming and examples of the BRX Do-More series can be found at this URL: https://accautomation.ca/series/brx-do-more-plc/ There are several reasons why we are using the BRX Do-More Controller. Here are just a few. – Standalone PLC with built-in I/O – Built-in Data Logging – Communication ability – Ethernet Port, RS232, RS485, USB – support for protocols such as Modbus RTU, Modbus TCP, ASCII, K-sequence (DirectLOGIC users), Custom Protocols (ASCII over serial, TCP or UDP over Ethernet) – Built-in Analog input and output – Integrated motion control – High-speed counters – Powerful instruction set (Video of Instructions in software)