P1AM Industrial Arduino GPIO Inputs and Outputs

The Arduino P1AM-GPIO is an industrial rated shield providing inputs and outputs for the P1AM-100 Arduino system. It provides a connection from most of the P1AM-100 GPIO pins to the front 18 position terminal block connector. We will be looking at the wiring and programming of this input and output industrial rated shield that mounts on the left side of the P1AM-100 CPU arduino unit. Analog points will be wired to a potentiometer and LED (light-emitting diode) for demonstration of the voltage range that we can input and output. Digital points will be wired for discrete input and output using a pushbutton switch and LED. PWM (pulse width modulation) will also be used to control the brightness of a LED connected to a digital output. Let's get started. More information can be obtained on our website. This includes all of the links mentioned in this video. https://accautomation.ca/productivity-open-p1am-industrial-arduino-gpio-inputs-and-outputs Here are previous posts in this Productivity Open Arduino Compatible Industrial Controller Series. A full list can be obtained at the following location: https://accautomation.ca/series/productivity-open-arduino-compatible-industrial-controller Industrial Controller Hardware https://accautomation.ca/productivity-open-arduino-compatible-industrial-controller-hardware - Starter Kit Unboxing Video https://youtu.be/y6T8fWKWan8 - Powering Up Video https://youtu.be/PHnLJa6X1d0 Installing the Software https://accautomation.ca/productivity-open-arduino-compatible-industrial-controller-installing-the-software https://youtu.be/M7Agvhq69og First Program https://accautomation.ca/productivity-open-p1am-industrial-arduino-first-program