XGB PLC Ladder Logic First Program

The IEC (International Electrotechnical Commission) XGB PLC, developed by LS Electric, offers a convenient programming interface using the XG5000 software in ladder diagram format. This widely used industrial PLC language is known for its simplicity and intuitiveness. The PLC can be programmed in four of the five official languages specified in the IEC standards. Previously, a setup involving green and red-lighted pushbutton switches was integrated (wired and tested) with our LS Electric XGB PLC (XEM-DN32H2 Unit). We will continue creating, downloading, and testing a start-stop circuit using ladder logic in our controller. Monitoring the ladder logic program with the XG5000 software provides a user-friendly experience and familiar tools. Let's get started. Detailed information and links can be found in the corresponding post here. https://accautomation.ca/xgb-plc-ladder-logic-first-program/ The entire XGB PLC Learning Series can be found here: https://accautomation.ca/series/ls-electric-xgb-plc-series/ 00:00 XGB PLC Ladder Logic First Program 02:12 Start a New Project 03:33 Assign Names to Inputs and Outputs 04:19 Create the Ladder Logic Diagram Program 06:35 Transfer the Program 08:23 Monitor the Program LS Electric XGB PLC Series https://accautomation.ca/series/ls-electric-xgb-plc-series/ FAQ https://accautomation.ca/series/ls-electric-xgb-plc-series/ls-xgb-series-xem-plc-faq/