We will now put our first program into the C-More Micro HMI Panel using the C-More Micro programming software. The Do-More Designer Simulator will be used with a modified Start Stop Jog Circuit so we can use our HMI screen to control the output as well as the inputs on the PLC.
The PLC logic for our circuit can be found in our post: How to Make a Start / Stop / Jog Circuit in a PLC. The YouTube video can be seen here.
Our C-More Micro HMI Panel will be communicating to the PLC simulator via Ethernet with the Modbus TCP protocol. Let’s get started.
More information can be obtained on our website. This includes all of the links mentioned in this video.
https://accautomation.ca/c-more-micro-hmi-first-program
00:00 C-More Micro First Program
00:40 Do-More Start Stop Jog Circuit
01:09 Modified Circuit for C-More Micro
01:27 Modbus Addresses in Do-More
02:50 C-More Micro Programming Software - Communication Parameters
04:58 C-More Programming Screen
05:15 C-More Pushbuttons
10:18 C-More Indication Light
12:03 C-More Micro Program Transfer
13:05 Testing the C-More Micro to Do-More Program
Previously we have discussed the following in our C-More Micro HMI Panel:
System Hardware
