BRX Do-More PLC Establishing Communication
visibility
7K views
calendar_month
Oct 15, 2022
We will now use the Do-More Designer software to establish communication with the BRX Do-More PLC. This is the same software that we used in the Learn PLC Programming Fee Video Series.
https://www.youtube.com/playlist?list=PL3y71jAPOdZB5LJMMotZP36LvzfdgkgzW
Using the Do-More Designer software, we will communicate via USB, RS485, and Ethernet. These three methods will allow us to communicate to our BRX PLC in order to program or troubleshoot this controller. Once we have established communication we will then look at updating the firmware in our controller. Let’s get started.
More information can be obtained at our website. This includes all of the links mentioned in this video. https://accautomation.ca/brx-plc-establishing-communication
BRX Do-More PLC Updating Firmware Video
https://youtu.be/gsfcGGK4-Sk
Previously in this BRX Do-More Series PLC, we looked at the following:
System Hardware
https://accautomation.ca/brx-plc-system-hardware
System Hardware Video
https://youtu.be/wSYgY09VYeA
Unboxing Video
https://youtu.be/-Tf8m3BqzPo
Installing the Software
https://accautomation.ca/brx-plc-installing-the-software
Installing the Software Video
https://youtu.be/iFI1ebP8Zkk
There are several reasons why we are using the BRX Series Controller. Here are just a few.
- Standalone PLC with built-in I/O
- Built-in Data Logging
- Communication ability - Ethernet Port, RS232, RS485, USB - support for protocols such as Modbus RTU, Modbus TCP, ASCII, K-sequence (DirectLOGIC users), Custom Protocols (ASCII over serial, TCP or UDP over Ethernet)
- Built-in Analog input and output
- Integrated motion control
- High-speed counters
- Powerful instruction set (Video of Instructions in software)
- Ability to expand the system with a variety of modules
- Part of the Do-More series of PLCs which use the same free software. (Do-More Designer)
- Integrated simulator in the software capable of external communications for testing
The BRX series of programmable logic controllers consist of four different units. They differ depending on the Inputs and Outputs built into the unit and if it has an ethernet port.
No I/O Micro PLC unit – (BX ME)
10 Point Micro PLC unit – (BX 10/10E)
18 Point Micro PLC unit - (BX 18/18E)
36 Point Micro PLC unit - (BX 36/36E)
These CPUs (Central Processing Units) are also known as MPU (Multi-Processing Units) because of the communication capabilities.
https://www.accautomation.ca
Show More keyboard_arrow_down
Show Lesskeyboard_arrow_upsell
#Communications Equipment
# Data Formats & Protocols
# Data Management
# Enterprise Resource Planning (ERP)
# Factory Automation
# Manufacturing
# Networking Equipment