We will now put our first program into the C-More EA9 HMI Panel using the C-More programming software. The Do-more Designer Simulator will be used with a modified Start Stop Jog Circuit so we can use our HMI screen to monitor the output as well as control the inputs on the PLC.
Communications will be established to our C-More EA9-T10CL unit and the firmware will be updated. We will then develop our control for our PLC ladder logic circuit.
The PLC logic for our circuit can be found in our post: How to Make a Start / Stop / Jog Circuit in a PLC. Our C-More EA9 HMI Panel will be communicating to the PLC simulator via Ethernet with the Modbus TCP protocol. Let’s get started.
c-more first program
More information can be obtained on our website. This includes all of the links mentioned in this video.
https://accautomation.ca/c-more-ea9-hmi-series-panel-first-program
00:00 C-More First Program - EA9 Series
00:33 Page Display - Zooming
01:32 Panel and Communication Setup
02:20 Review of PLC Program and Addresses
03:16 Adding C-More Pushbuttons - Start Stop Jog
07:07 Adding C-More Indicator Light
08:42 Transfer and Test Program
Establishing Communication and Updating Firmware Video
https://youtu.be/WTHw1p-iJFE
First Program Video
https://youtu.be/5c8ZsdK5dak
