We will now create our first program on Productivity. Last time we connected the Productivity 1000 Series PLC with our computer running the Productivity Suite Software. A micro USB and an Ethernet (RJ45) communication link was made to our programmable logic controller. We will now create our first program for our Productivity 1000 Series PLC. Our program will be a simple start-stop circuit for a motor.
Here is a post that will explain the logic behind our program circuit.
http://accautomation.ca/how-to-make-a-start-stop-jog-circuit-in-a-plc/
The latest Productivity Suite software version is 3.1.0.11. This is the programming software that we will be using to create our logic for control. Let’s get started.
More information can be obtained on our website. This includes all of the links mentioned in this video.
https://accautomation.ca/productivity-1000-series-plc-first-program
00:00 Productivity first program
00:20 Start the Productivity Suite Software
00:48 Productivity hardware
01:30 Productivity hardware configuration
03:12 Productivity tag database - Default tag assignments
04:55 Productivity create a program
08:12 Save productivity program
08:35 Transfer productivity program
08:50 Testing/monitoring productivity program
Previously in this Productivity 1000 Series PLC, we looked at the following:
System Hardware
