Omron CP1H PLC Compare Instructions

We will now look at the compare instructions available on the Omron CP1H controller. Just about every program usually has some data comparison instruction. This is the ability to compare information from one area of the controller to another and act on results. The Omron CP1H series of programmable logic controllers provide several different ways to compare the information. We will be looking at several different ways in which we can do this with some programming examples. Sometimes the instruction used for data comparison in the Omron CP1H will determine the kind of data that we are comparing. You must look at the individual instructions to determine if this is the case or not. More information can be obtained at our website. This includes all of the links mentioned in this video. https://accautomation.ca/omron-cp1h-compare-instructions Previously in this Omron CP1H series, we looked at the following: System Hardware https://accautomation.ca/omron-cp1h-system-hardware/ CX-Programmer https://accautomation.ca/omron-cp1h-cx-programmer/ Establish Communication https://accautomation.ca/omron-cp1h-establish-communication/ Omron CP1H Setting, Forcing and Online Editing https://accautomation.ca/omron-cp1h-setting-forcing-and-online-editing/ Omron CP1H Numbering Systems and Addressing https://accautomation.ca/omron-cp1h-numbering-systems-and-addressing/ Omron CP1H Timers https://accautomation.ca/omron-cp1h-timers Omron CP1H Counters https://accautomation.ca/omron-cp1h-counters Omron CP1H Data Movement https://accautomation.ca/omron-cp1h-data-movement There are several reasons why we are using the Omron CP1H Controller. Here are just a few. - Standalone PLC with built-in I/O - Communication ability - Ethernet Port, RS232, RS485 - support for protocols such as Modbus, Host Link, ASCII (No Protocol) - Built-in Analog inputs and outputs - 4 axis control of motion - 4 high-speed counters - powerful instruction set (similar to CS and CJ series) - Ability to expand the system with a variety of modules The Omron CP1 series of programmable logic controllers consists of three different units. CP1E is the cost-effective unit, CP1L is the high performing controller that can come with embedded Ethernet and the CP1H is the position control and comprehensive programmable logic controller. We will be looking a the CP1H for this series, but a majority of the information can be applied to the CP1E and the CP1L controllers as well. https://www.accautomation.ca