The IEC (International Electrotechnical Commission) XGB PLC, developed by LS Electric, offers a convenient programming interface using the XG5000 software in ladder diagram format. This widely used industrial PLC language is known for its simplicity and intuitiveness. The PLC can be programmed in four of the five official languages specified in the IEC standards.
Previously, a setup involving green and red-lighted pushbutton switches was integrated (wired and tested) with our LS Electric XGB PLC (XEM-DN32H2 Unit). We will continue creating, downloading, and testing a start-stop circuit using ladder logic in our controller. Monitoring the ladder logic program with the XG5000 software provides a user-friendly experience and familiar tools. Let's get started.
Detailed information and links can be found in the corresponding post here.
https://accautomation.ca/xgb-plc-ladder-logic-first-program/
The entire XGB PLC Learning Series can be found here:
https://accautomation.ca/series/ls-electric-xgb-plc-series/
00:00 XGB PLC Ladder Logic First Program
02:12 Start a New Project
03:33 Assign Names to Inputs and Outputs
04:19 Create the Ladder Logic Diagram Program
06:35 Transfer the Program
08:23 Monitor the Program
LS Electric XGB PLC Series https://accautomation.ca/series/ls-electric-xgb-plc-series/
FAQ
https://accautomation.ca/series/ls-electric-xgb-plc-series/ls-xgb-series-xem-plc-faq/
