Easy Steps to Establish Communication between Arduino Opta IoT PLC

We will now establish communication between the Arduino Opta IoT PLC and our computer. Every Opta IoT PLC comes with the ability to be programmed using the professional series Arduino PLC IDE. (Arduino PRO) This is designed to implement industrial machine control functions and programming, including ladder logic. The Opta hardware is also designed to support industrial voltages. We will guide you through initializing and licensing the Opta IoT PLC. We will use the micro-C USB connector and the Arduino PLC IDE software to communicate with the Opta PLC. Furthermore, we will also demonstrate how to put the Opta PLC into bootloader mode to enable the use of Arduino IDE programs. Let’s get started. Note: You do not have to purchase a software license for the Arduino PLC IDE when programming an OPTA controller. Detailed information about this post can be found on our website: https://accautomation.ca/easy-steps-to-establish-communication-arduino-opta-iot-plc/ 00:00 Easy Steps to Establish Communication between Arduino Opta IoT PLC 01:18 Connection to the Opta IoT PLC 02:26 Opta PLC Firmware and license activation 05:19 Using Arduino IDE for Communication - Bootloader Arduino Opta IoT PLC Series https://accautomation.ca/series/arduino-opta-plc/ This contains the following highlighted posts and videos and more: Arduino Opta IoT PLC Hardware https://accautomation.ca/cutting-edge-hardware-of-arduino-opta-iot-plc/ https://youtu.be/a8JFUr11b1k Arduino Opta Software Installation https://accautomation.ca/arduino-opta-software-installation/