We will now establish Omron cp1h communication using the built-in USB connection. CX-Programmer will be used to communicate.
The Omron CP1H series of programmable logic controllers are programmed from CX-Programmer. CX-Programmer is part of the Omron CX-One Factory Automation Integrated Tool Package. We will now establish communication with our CP1H PLC using CX-Programmer. We will be using the USB connection (Built into the CPU) as well as an RS485 connection using the CP1W-CIF11 module. The Start-Stop and Jog circuit that we developed last time will be transferred to the PLC unit. We will then verify that the program in the PLC is the same as the program logic in CX-Programmer.
More information can be obtained on our website. This includes all of the links mentioned in this video. https://accautomation.ca/omron-cp1h-establish-communication/
00:00 Omron CP1H Programming Communication
00:35 Hardware - USB and RS485 communication to Omron CPU
01:43 RS485 to USB Converter
02:30 Serial RS485 (Similar to RS232) Establish Communication
06:15 Transfer program to Omron PLC
08:08 Verify program in PLC
09:10 USB port to Omron programming software
The purpose of this Omron CP1H Series is to get you familiar with this programmable logic controller. (PLC) Previously in this Omron CP1H series, we looked at the following:
System Hardware
http://accautomation.ca/omron-cp1h-system-hardware/
CX-Programmer
http://accautomation.ca/omron-cp1h-cx-programmer/
