Omron CP1H PLC Compare Instructions

We will now look at the compare instructions available on the Omron CP1H controller. Just about every program usually has some data comparison instruction. This is the ability to compare information from one area of the controller to another and act on results. The Omron CP1H series of programmable logic controllers provide several different ways to compare the information. We will be looking at several different ways in which we can do this with some programming examples. Sometimes the instruction used for data comparison in the Omron CP1H will determine the kind of data that we are comparing. You must look at the individual instructions to determine if this is the case or not. More information can be obtained at our website. This includes all of the links mentioned in this video. https://accautomation.ca/omron-cp1h-compare-instructions Previously in this Omron CP1H series, we looked at the following: System Hardware https://accautomation.ca/omron-cp1h-system-hardware/ CX-Programmer https://accautomation.ca/omron-cp1h-cx-programmer/ Establish Communication https://accautomation.ca/omron-cp1h-establish-communication/ Omron CP1H Setting, Forcing and Online Editing https://accautomation.ca/omron-cp1h-setting-forcing-and-online-editing/ Omron CP1H Numbering Systems and Addressing https://accautomation.ca/omron-cp1h-numbering-systems-and-addressing/ Omron CP1H Timers https://accautomation.ca/omron-cp1h-timers Omron CP1H Counters https://accautomation.ca/omron-cp1h-counters