We will now look at online editing, setting, and forcing that can be done on the Omron CP1H controller. The Omron CP1H series of programmable logic controllers are capable of online programming. This is when the PLC is solving logic and at the end of the scan, programming logic is added or modified. The next scan will now solve the new or modified logic in the PLC. CX-Programmer can also set or force inputs and outputs in the controller. This is usually used for troubleshooting and testing the PLC logic. We will use the Start Stop and Jog circuit that we have developed to test the program in the PLC. Forcing and setting the inputs and outputs will demonstrate to us the operation of the logic. Online programming (online editing) will also be done with our CP1H controller.
More information can be obtained at our website. This includes all of the links mentioned in this video. https://accautomation.ca/omron-cp1h-setting-forcing-and-online-editing/
00:00 Omron CP1H PLC Setting, Forcing and Online Editing
01:25 Modes of the Controller – Omron CP1H Online Editing
03:20 Forcing On, Forcing Off
07:31 Omron Online Edit
Previously in this Omron CP1H series, we looked at the following:
System Hardware
https://accautomation.ca/omron-cp1h-system-hardware/
CX-Programmer
https://accautomation.ca/omron-cp1h-cx-programmer/
Establish Communication
https://accautomation.ca/omron-cp1h-establish-communication/
There are several reasons why we are using the Omron CP1H Controller. Here are just a few.
- Standalone PLC with built-in I/O
