Omron CP1H Math Instructions

Programmable logic controllers are not typically known for their math ability. Modern PLC controllers now come with several math instructions to expand the ability to perform math routines. Every controller has different methods to handle math with varying systems of numbering. Binary, BCD (Binary Coded Decimal), and floating-point single and double are examples of some numbering systems. The following is a post on what everybody should know about PLC numbering systems. https://accautomation.ca/what-everybody-ought-to-know-about-plc-programmable-logic-controller-numbering-systems/ If you subscribe to our website, you will get a free copy of the article on numbering systems, which includes understanding the floating point. You must refer to the programming manual of the controller that you are programming for specific math instruction information. We will be looking at some of the math instructions in the Omron CP1H PLC. Examples of some of the instructions will be presented. More information can be obtained at our website. This includes all of the links mentioned in this video. https://accautomation.ca/omron-cp1h-math-instructions Previously in this Omron CP1H series, we looked at the following: System Hardware https://accautomation.ca/omron-cp1h-system-hardware/ CX-Programmer https://accautomation.ca/omron-cp1h-cx-programmer/ Establish Communication https://accautomation.ca/omron-cp1h-establish-communication/ Omron CP1H Setting, Forcing, and Online Editing https://accautomation.ca/omron-cp1h-setting-forcing-and-online-editing/ Omron CP1H Numbering Systems and Addressing https://accautomation.ca/omron-cp1h-numbering-systems-and-addressing/ Omron CP1H Timers