Stride MQTT Gateway Click PLC Modbus RTU TCP

We will use the Stride MQTT Gateway to connect to the Click PLC through Modbus TCP and RTU. MQTT protocol is used for machine-to-machine (M2M), internet of things (IoT) communication. This publish/subscribe messaging is used where limited device resources are available or network bandwidth is low. The MQTT protocol provides small size, low power usage, minimized data packets, and efficient distribution of information to one or many receivers. The Stride MQTT Gateway is an industrial 4.0 hardware component (IIoT - Industrial Internet of Things) that provides isolation and can easily interface with existing Modbus RTU and Modbus TCP communication protocols. We will be connecting a Stride MQTT Gateway to a Click PLC (Ethernet) via Modbus TCP. Previously we connected the Solo process temperature controller with Modbus RTU(RS485). We will leave this connection in place and add the Click PLC. The MQTT Gateway will communicate with HiveMQ Broker. MQTTBox Client will then read and write to the Click PLC and Solo process temperature controller. Let's get started. More information can be obtained on our website. This includes all of the links mentioned in this video. https://accautomation.ca/stride-mqtt-gateway-click-plc-modbus-rtu-tcp Previous MQTT discussions can be found at the following location: BRX Do-More Simulator MQTT Publish-Subscribe https://accautomation.ca/brx-do-more-simulator-mqtt-publish-subscribe https://youtu.be/assMcr7caa8 BRX Do-More PLC MQTT Communications https://accautomation.ca/brx-do-more-plc-mqtt-communications https://youtu.be/Tjtrxh1K-b4 Stride MQTT Gateway Modbus RTU TCP https://accautomation.ca/stride-mqtt-gateway-modbus-rtu-tcp Stride MQTT Gateway Unboxing - Video https://youtu.be/A2ae7Sq3DRE Stride MQTT Gateway Modbus RTU TCP - Video https://youtu.be/jBNobfsBaVg