Click PLC Send and Receive Serial Communication Instructions

Click plc send and receive serial communication instructions that can be used to communicate to external equipment. We will be communicating serially to a temperature controller using Modbus RTU serial RS485. Receive and Send instructions will allow you to send and receive serial data to an external device. The communication method that you setup can be ASCII or Modbus. ASCII (American Standard Communication for Information Interchange) can be used to send to devices such as a printer. Receiving ASCII can be used for connecting barcode scanners to the PLC. The barcode will be read as an ASCII string in the PLC. Modbus serial communication (Modbus RTU) is a standard protocol used in many automation devices. We will demonstrate the Send and Receive instruction by communicating Modbus to a Solo Temperature Controller. Our example will read the current process (PV) value and write the setpoint value (SV) in the controller. More information can be obtained on our website. This includes all of the links mentioned in this video. https://accautomation.ca/click-plc-send-and-receive-instructions 00:00 Click PLC Send and Receive Modbus RTU Serial to Solo Temperature Controller 00:35 Solo Process Temperature Controller Setup 02:17 Modbus RTU Communication Parameters 02:57 Click Modbus Recieve Instruction 03:38 Click Port Setup 04:40 Solo Modbus Read Addresses 06:40 Click Modbus Send Instruction 07:32 Solo Modbus Write Address 08:49 Testing our Modbus Communication - Click to Solo 09:14 Data View Monitoring Previously we discussed: Click PLC System-Hardware. https://accautomation.ca/click-plc-system-hardware/