Click PLC Local Expansion or Remote I/O?

Does the Click PLC have local expansion or remote inputs and outputs? The Click PLC can have a maximum of 8 I/O modules for each CPU. It does not have remote I/O but can be used in distributed I/O systems. Distributed I/O will not update every scan of the PLC. The Click PLC can have its own distributed I/O via the communication ports to itself or through a variety of devices like the Stride Remote I/O. It can be used as distributed I/O through Modbus TCP/ RTU, Ethernet IP, or MQTT to other systems like a BRX Do-More or Productivity Series PLCs. See the comments below for examples of these configurations. Stride Remote I/O with Solo Temperature Controller https://accautomation.ca/stride-mqtt-gateway-click-plc-modbus-rtu-tcp/ Click PLC to Modbus TCP RTU Remote IO BX-MBIO (Distributed I/O) https://accautomation.ca/click-plc-to-modbus-tcp-rtu-remote-io-controller-bx-mbio/ Productivity 1000 Series PLC Click EtherNet/IP Remote I/O (Distributed I/O) https://accautomation.ca/productivity-1000-plc-click-ethernetip-remote-io/ Programming and examples of the Click and Click PLUS PLC series can be found at this URL: https://accautomation.ca/series/click-plc/ General information on the Click series of controllers: www.clickplcs.com/config