Click PLC Software Address Picker

Using the Address Picker in the Click Programming Software we can see all of the memory addresses available for your program. Start the Click PLC programming software Select Address Picker under the Navigation Window | Ladder Program. Alternatively, you can also select it by the main menu | Program | Address Picker... or Ctrl + T. Select display MODBUS Address on the bottom right of the Address Picker: Edit Mode window. The Modbus address can now be displayed as 984 or HEX Addressing Programming and examples of the Click and Click PLUS PLC series can be found at this URL: https://accautomation.ca/series/click-plc/ There are several reasons why we are using the Click and Click PLUS PLCs. Here are just a few. - Investment is low for the hardware and the software is free - Standalone PLC with built-in I/O - Communication ability - Ethernet Port, RS232, RS485 - support for protocols such as Modbus RTU, Modbus TCP, etc. - Ability to expand the system with a variety of modules including RTD and Thermocouple inputs directly. General information on the Click series of controllers: www.clickplcs.com/config There are also system configuration tools that will calculate the power budget, I/O count, and price.