EasyPLC Simulator Robotic Cell Click PLC

The Machine Simulator (MS) is part of the EasyPLC software suite. It has many built-in machines that are used to show different programming techniques. The robotic cell example is one of these machines. This will demonstrate a sequencer example. The logic will step through different steps in order to perform the task. In this case, an engine is lifted and placed onto a rack. We will be using a Click PLUS PLC and the Click programming software to program this EasyPLC machine simulator engine loader of the robotic cell. This will be done using Modbus TCP (Ethernet) for communications. The program will allow you to start, stop and jog the sequencer. Using the five steps for program development we will show how this sequencer is programmed. Let’s get started. More information can be obtained on our website. This includes all of the links mentioned in this video. https://accautomation.ca/easyplc-simulator-robotic-cell-click-plc/ The entire EasyPLC Software Suite series can be found here: https://accautomation.ca/series/easyplc-software-suite/ 00:00 EasyPLC Simulator Robotic Cell Click PLC 01:15 Define the task: (Step 1 – Easyplc Robotic Cell) 03:10 Define the Inputs and Outputs: (Step 2 – Easyplc Robotic Cell) 06:00 Develop a logical sequence of operation: (Step 3 – Easyplc Robotic Cell) 08:26 Develop the Click PLC program: (Step 4 – Easyplc Robotic Cell) 17:13 Test the program: (Step 5 – Easyplc Robotic Cell) Previous posts include the following: EasyPLC Installing the Software https://accautomation.ca/easyplc-installing-the-software/ https://youtu.be/EbWS_elbI2w