Click PLC Timer - Trip Delay

Click PLC Timers / Trip Delay This PLC program will monitor multiple error bits. If any of them are on for an extended period of time, then a timer will start timing. Once the timer expires we know that the bit has been on too long activating an output. This program will pack all of the error bits into a double-word address. A comparison is used to determine if any of the bits are activated. The timer times out after a set time to indicate an error has occurred. Download this Click PLC sample program from the link below. Programming and examples of the Click and Click PLUS PLC series can be found at this URL: https://accautomation.ca/series/click-plc/ There are several reasons why we are using the Click and Click PLUS PLCs. Here are just a few. - Investment is low for the hardware and the software is free - Standalone PLC with built-in I/O - Communication ability - Ethernet Port, RS232, RS485 - support for protocols such as Modbus RTU, Modbus TCP, etc. - Ability to expand the system with a variety of modules including RTD and Thermocouple inputs directly. General information on the Click series of controllers: www.clickplcs.com/config There are also system configuration tools that will calculate the power budget, I/O count, and price.