Click PLC Software Copy and Paste Several Rungs

Select the starting rung by clicking on the rung number. This will highlight the rung. The Click PLC programming software can copy and paste several rungs at a time. Press and hold the shift key and use the down arrow key to select each additional rung. Use the copy command from the edit menu on the main menu or right-click on the highlighted selection and select copy. This will place the chosen rungs on the clipboard. Move to the new location for your copied rungs of ladder logic. Use the paste command from the Edit menu or right-click on the location and select paste. The clipboard information will now be inserted into your code. Programming and examples of the Click and Click PLUS PLC series can be found at this URL: https://accautomation.ca/series/click-plc/ General information on the Click series of controllers: www.clickplcs.com/config System configuration tools will also calculate the power budget, I/O count, and price. Click PLUS PLC Configuration: https://www.automationdirect.com/clickplcs/config/clickplusconfig Click PLC Configuration: https://www.automationdirect.com/clickplcs/config We are using the Click and Click PLUS PLCs for several reasons. Here are just a few. - Investment is low for the hardware, and the software is free - Standalone PLC with built-in I/O