BRX Do-More PLC AdvancedHMI – Modbus TCP

Modbus TCP will be used to connect AdvancedHMI to our BRX Do-More controller using Ethernet. Advanced HMI is a powerful, adaptable HMI/SCADA (Supervisory Control and Data Acquisition) development package that takes advantage of Visual Studio. There is no coding required and you can simply drag and drop items onto the page. The best thing is that the software is free. We will look at using AdvancedHMI with the BRX Do-More Series PLC. Our sample BRX Do-More PLC program will display a digital panel meter and a gauge of a value in the PLC. Stop and start momentary pushbuttons on the HMI will allow this number to increase or stop. An indication will turn green when the number is increasing and red when it has stopped. The AdvancedHMI package will communicate Modbus TCP over Ethernet to the BRX Do-More PLC. We will be able to monitor our process via the AdvancedHMI window. Let's get started. More information can be obtained at our website. This includes all of the links mentioned in this video. https://accautomation.ca/brx-plc-advancedhmi-communication-modbus-tcp 00:00 BRX Do-More PLC AdvancedHMI – Modbus TCP 01:06 Visual Studio Community 2017 – AdvancedHMI 02:28 BRX Do-More Series PLC – Modbus Address Map and Program 05:08 AdvancedHMI Setup Program 15:24 Running the AdvancedHMI Program Previously in this BRX Series PLC, we looked at the following: System Hardware http://accautomation.ca/brx-plc-system-hardware System Hardware Video https://youtu.be/wSYgY09VYeA Unboxing Video https://youtu.be/-Tf8m3BqzPo Installing the Software