BRX Do More PLC Update Firmware

BRX Do-More PLC Update Firmware Select Update Firmware... from the main menu | PLC. The update firmware window will now be displayed. Select the check for new firmware and update if required. Select Update PLC Operating System. The PLC must be in program mode. (CPU Switch in TERM or STOP) Select update. A success window will be displayed. Select OK. Select Update PLC Booter. Once again the PLC must be in program mode. Select update. A success window will be displayed after the update. Select OK. You may have to cycle power to the PLC once the firmware has been updated. Programming and examples of the BRX Do-More series can be found at this URL: https://accautomation.ca/series/brx-do-more-plc/ General information on the BRX Do-More series of controllers: https://www.automationdirect.com/do-more/brx There are also system configuration tools that will calculate the power budget, I/O count, and price. BRX Do-More PLC Configuration: https://www.automationdirect.com/do-more/brx/config There are several reasons why we are using the BRX Do-More Controller. Here are just a few. – Standalone PLC with built-in I/O – Built-in Data Logging – Communication ability – Ethernet Port, RS232, RS485, USB – support for protocols such as Modbus RTU, Modbus TCP, ASCII, K-sequence (DirectLOGIC users), Custom Protocols (ASCII over serial, TCP or UDP over Ethernet)