BRX Do-More PLC Analog Dusk to Dawn Program

We will now look at a BRX Do-More PLC Analog example program. A dusk to dawn sensor usually is discrete on/off of the lighting control. If we want to vary the lights to mimic more of the sunset and rise, we would use an analog output to control the lights. I was recently asked about such a program. Every day they wanted the lights to go off at 10 pm and come back on at 6 am. At 9:30 pm the lights would be on at 70% or 7volts of a 0-10V signal. In the next half hour, the program will bring the lights from 70% down to 0%. In the morning the lights will come back on within the half-hour from 0% to 70%. Poultry Farms are one place that would utilize this program. We will be developing a program that will do this with our BRX PLC (Do-More). Let’s get started! More information can be obtained on our website. This includes all of the links mentioned in this video. https://accautomation.ca/brx-plc-analog-dusk-to-dawn-program The entire BRX Series PLC can be found at the following location: https://accautomation.ca/series/brx-do-more-plc/ Here are the individual posts with video links: System Hardware https://accautomation.ca/brx-plc-system-hardware https://youtu.be/wSYgY09VYeA Unboxing Video https://youtu.be/-Tf8m3BqzPo Installing the Software https://accautomation.ca/brx-plc-installing-the-software https://youtu.be/iFI1ebP8Zkk Establishing Communication https://accautomation.ca/brx-plc-establishing-communication