Horner XL4 Installing the Software Cscape

The Horner XL4 OCS all-in-one controller is programmed using Csape. Cscape (Control Station Central Application Programming Environment) This single programming software package is designed to be easy to use and maintain. We will now install this programming package onto our computer.

Previously we discussed the Horner XL4 System Hardware

Download Horner Cscape Programming Software

The first thing that we need to do is to download the free Cscape software from Horner. Here is the link from Horner Canada:
Here is the link from Horner USA:
Note: You must register before you can download the software. This is free to register.

The current version of the software is 9.70 SP1. The file name is Cscape_9.70_SP1_No_Symbols_Setup.exe

Installing Horner Cscape All In One Programming Software

Once you have the software downloaded. Double click the file to start the installation. The minimum requirements are as follows:
Pentium 3 450 MHz, 256MB RAM, Windows 2000, XP, Windows 7

You will now see an initial splash screen. Hit Next to continue the installation.

A warning screen will then appear to inform you that you will be installing Cscape 9.70 onto your computer. Hit Next to continue.

A licensing agreement will now be presented. You must accept the terms of the license agreement to continue. Click ‘I accept the terms in the license agreement’ and then hit Next to continue.

The files will now be copied to your computer.

Setup Type will now be presented to you. Select Typical and this will install all of the features of the program into your computer. Hit Next to continue.

The installation package will now ask if you want everyone who uses the computer to have access to this software or just you. (The person currently signed into the computer.)
Once you made your choice hit Next to continue.

The package will now install onto your computer and update your system files.

When Cscape has finished installing it will allow you to launch the program after you hit the Finish button.

The Cscape programming package has now finished installing on your computer.

The programming and reference manual for Cscape can be downloaded at the following URL:

Next time we will look at Setting up the free Cscape software.

Watch on YouTube : Horner XL4 Installing the Software Cscape
If you have any questions or need further information please contact me.
Thank you,

If you’re like most of my readers, you’re committed to learning about technology. Numbering systems used in PLC’s are not difficult to learn and understand. We will walk through the numbering systems used in PLCs. This includes Bits, Decimal, Hexadecimal, ASCII and Floating Point.

To get this free article, subscribe to my free email newsletter.

Use the information to inform other people how numbering systems work. Sign up now.

The ‘Robust Data Logging for Free’ eBook is also available as a free download. The link is included when you subscribe to ACC Automation.

Leave a Reply

Your email address will not be published. Required fields are marked *

Currently you have JavaScript disabled. In order to post comments, please make sure JavaScript and Cookies are enabled, and reload the page. Click here for instructions on how to enable JavaScript in your browser.