We will be using an MQTT broker in Node-RED to communicate to the productivity PLC clients. MQTT stands for Message Queuing Telemetry Transport. This simple ‘publish and subscribe’ communication protocol does not take too many resources.
Constrained devices with low bandwidth are ideal for MQTT. This protocol provides machine-to-machine (M2M) connectivity, perfect for the Internet of Things. (IoT) This protocol is not for remote IO or real-time (deterministic) applications. MQTT is a good solution for applications that move data from hundreds or thousands of machines (sensors) to clients in many networks.
We will be installing and programming the AEDES MQTT Broker in Node-RED. A productivity P2000, P1000, and Node-RED will be the clients communicating to the broker. The PLC simulator inputs on each controller will control the outputs on the other controller. This will demonstrate the communication capability for publishing and subscribing to this IoT platform. Let’s get started. Continue Reading!
Node-RED will be used on the Raspberry Pi 4 to communicate serial Modbus RTU to a Solo process temperature controller and Click PLC using twisted pair RS485. This will be done on the same serial network so the devices will be daisy-chained together on the two wires.
We will be reading the PV (present value) and SV (set value) of the Solo temperature controller and then writing these values into the Click PLC. An SV value will then be read from the Click PLC and if it has changed, the value will be written to the SV of the Solo controller. Let’s get started. Continue Reading!