P1AM Industrial Arduino GPIO Inputs and Outputs

by

The P1AM-GPIO is an industrial rated shield for the P1AM-100 Arduino system. It provides a connection from most of the P1AM-100 GPIO pins to the front 18 position terminal block connector. We will be looking at the wiring and programming of this input and output industrial rated shield that mounts on the left side of … Read more

BRX Do-More PLC to Modbus TCP RTU Remote IO BX-MBIO

by

The BRX Do-More PLC can communicate to a remote I/O (input and output) controller modules using the Modbus protocol for communications. The BX-MBIO provides both Modbus RTU and Modbus TCP interfaces. Modbus RTU is a serial communication and Modbus TCP is an Ethernet communication. Modbus RTU is supported over an RS-485 serial connection. Modbus TCP … Read more

Productivity Open P1AM Arduino Operators

by

Operators in your Arduino sketches (programs) consist of comparison blocks, concatenate strings, bitwise operators, string conversion, ‘not’ operator, and compound operators. These operations generally will be used with other instructions in your sketch. It is important to understand what instructions are available and what they are designed to accomplish. We will be looking at each … Read more

Modbus RTU TCP Remote IO Controller BX-MBIO

by

We will be looking at the Modbus remote IO BX-MBIO-M controller. This is the Do-More Modbus Remote I/O supported protocol unit. We will discuss the hardware and then connect and configure the unit to work with our existing BRX Do-more PLC. Let’s get started. The BX-MBIO Modules are remote I/O controller modules that provide a … Read more

Productivity Open P1AM Arduino Program Control

by

Arduino programs (sketches) can be written in thousands of different ways. The best Arduino program control will be determined by the purpose of your program and what you are trying to accomplish. To simplify the logic we will be looking at program control that can be achieved using productivity blocks. Program control will look at … Read more

BRX Do-More PLC Ethernet Remote IO BX-DMIO

by

We will now look at the BRX do-more plc ethernet remote IO. The BRX Do-More PLC has its own line of remote input and output expansion units. You can add up to 8 I/O expansion units per controller (CPU) and 8 BRX expansion modules per expansion unit. This will make your system grow with your … Read more