We will now look at the Horner report generator. The Horner APG XL4 all in one controller has a feature to generate text reports. These reports can consist of text and data from memory locations in the controller. Reports can be printed using a serial interface printer through any of the serial ports of the unit or can be saved on the removable micro SD media card attached to the device. We will be taking our process mixing tank and generating a report that will show when the batch started, filled the tank, and when the batch was finished emptying. This report will be saved on the removable micro SD media card attached to the unit. Continue Reading!
We program the Horner XL4 OCS all-in-one controller by using Cscape. We will now use our Cscape software to establish communication. Last time we customized Cscape with icons to make it easier to find, communicate and control the unit. There are two different ways to communicate to the XL4 OCS controller, Ethernet and Serial. There are several different methods within these two ways that the XL4 will communicate. The Cscape software package will communicate both of these ways. We will look at establishing communication using Ethernet, USB (Serial), and Serial RS232. Another two serial ways to communicate would be RS485/RS422 (Serial) and CAN Bus (Serial). These two methods allow multiple controllers connected to the communication network. This is similar to Ethernet. Continue Reading!