Tag Archives: Click PLC Modbus ASCII Protocol

ACC Automation 2020 Yearly Review


Accelerate Learning …
Accelerate Machines…
Accelerate Knowledge…
ACC Automation

What a difference a year makes! Social distancing, mask-wearing, hygiene, social circles, etc are just a few of the terms we hear every day in this Covid-19 world. Video conferencing with Zoom, Teams, and Google Meet are the norm in business today. Information is knowledge, and everyone wants to be able to see, control, and summarize production data on a regular basis. Technologies are merging and communicating like never before. What was impossible is now possible for the industrial plant floor. We are looking forward to the New Year and new possibilities for implementing your control solution.

Each year we like to take a few minutes and reflect on the past, current, and future of ACC Automation. You have helped us to build the site that you see today through questions, comments, and suggestions. Thank you. Keep on Reading!

Click PLC Modbus ASCII Protocol Communication


We will now look at the click plc modbus ascii protocol. This communication will happen in PLC ladder logic and communicate through the serial port (RS485) to a Solo process temperature controller. Modbus ASCII will be the communication protocol.
Modbus is a communication method used for transmitting information over serial lines between electronic devices. The device requesting the information is called the Modbus Master (Client) and the devices supplying information are Modbus Slaves (Servers). This protocol was originally developed by Modicon systems.
Modbus protocol comes in basically three different types. Ethernet (Modbus TCP) or Serial (Modbus RTU or Modbus ASCII). Modbus TCP and Modbus RTU come as standard protocols in the productivity series of PLCs.

We will connect the Click PLC to a Solo process temperature controller. This will be done using the Modbus ASCII protocol over serial RS485 communication wire. (Media) The present and set values (PV / SV) will be read from the Solo controller and the set value will be written when required. Let’s get started. Keep on Reading!