Tag Archives: productivity2000

Productivity 2000 Series PLC Online Programming


The Productivity Suite Software allows us to modify our existing program and execute the new code without stopping the scanning of the PLC. This is referred to as online programming or editing. We change the ladder logic code and when we save it to the PLC, the current scan of the PLC is held until the new code is written into the unit. It then releases the scan and our new program starts to execute. This happens in milliseconds so our process can continue to operate.
Productivity 2000 Series PLC Online Programming
We will be taking our existing Start / Stop circuit from last time and add a Jog input using online programming. Changing the program online is a common method of programming. The documentation will also be changed during this online program change. Let’s get started. Keep on Reading!

Productivity 2000 Series PLC Debug Mode


The productivity suite programming software has a debug mode. This will allow you to view and control the rung execution on your ladder logic code. These programming tools allow you to troubleshoot, find, and correct errors in the PLC programming logic.
Productivity 2000 Series PLC Debug Mode
We will be adding a couple of rungs to our exiting start-stop circuit we created last time in our productivity 2000 PLC. Using the debug mode we will explain the scan of the PLC and use these tools to sequence the logic. Let’s get started. Keep on Reading!

Productivity 2000 Series PLC Software Install


The Productivity 2000 Series PLC uses the Productivity Suite Software. The software can be downloaded free of charge. It is the full package without restrictions or limitations.
Productivity 2000 Series PLC Software Install
The latest Productivity Suite software version is 3.10.2(1). Automation Direct has put over 20 years of programmable controller software experience along with customer suggestions and feedback into this programming package. It has great features that we will be exploring as we program our Productivity 2000 Series PLC.
This is the same software that will program the entire Productivity Series of programmable logic controllers.
Productivity 2000 Series PLC Software Install
Productivity 1000 P1 (Stackable Micro PLC) P1000
Productivity 2000 P2 (Micro Modular Programmable Controller) P2000
Productivity 3000 P3 (Modular Programmable Controller) P3000
We will be installing and reviewing the Productivity Suite software version 3.10.2(1). Let’s get started. Keep on Reading!

Productivity 2000 Series PLC – P2000 Hardware


The Productivity 2000 series of programmable logic controllers has a slim DIN rail density form factor. This means that this micro-modular PLC can have a power supply, CPU, and seven IO modules in only 10-1/2 inches. Input and output cards can be installed, removed, or replaced without turning the power off to the PLC system. (Hot-swappable) This means that your system can remain running while troubleshooting your system hardware. The Productivity 2000 hardware supports up to 240 local I/O for discrete, analog, and motion applications with a high-performance CPU equipped with five communications ports and 29 discrete and analog I/O modules. Several remote IO options are available on this award-winning PLC in the Productivity series family.
Productivity 2000 Series PLC - P2000 Hardware Features
Productivity 1000 (Stackable Micro PLC)
Productivity 2000 (Micro Modular Programmable Controller)
Productivity 3000 (Modular Programmable Controller)
These three series by FACTS engineering currently make up the Productivity Series PLC from Automation Direct.
We will be looking at the features of the powerful P2000 controller. Let’s start by looking at the P2000 hardware. Keep on Reading!