Categories
Click PLUS PLC PLC Learning Timers

Click Plus Real Time Clock Setup and Use

The real-time clock on the Click Plus can now be more accurate. A network time service (NTP or SNTP) has been added to the Click Plus controller. This will allow the time to be synchronized with an internet time server or local network. Daylight savings time is quickly implemented with just a memory retentive bit that we can turn on and off based on the time change in the area.
Click Plus Real Time Clock Setup and Use
We will be setting up the network time service on our Click Plus. The real-time clock (RTC) will be updated via the internet time service. Daylight savings time and the RTC will also be programmed. This will be based on our previous Click Real-Time Clock post. Let’s get started.

Categories
Click PLUS Communication MQTT Node-RED PLC

Click Plus PLC MQTT Communication

We will now look at the MQTT communication capability using our Click plus PLC.
MQTT stands for Message Queuing Telemetry Transport. This simple ‘publish and subscribe’ communication protocol, does not take too many resources.
Constrained devices with low bandwidth are ideal for MQTT. This protocol provides machine-to-machine (M2M) connectivity which is ideal for the Internet of Things. (IoT) This protocol is not for remote IO or real-time (deterministic) applications. MQTT is a good solution for applications that move data from hundreds or thousands of machines (sensors) to clients in many networks.
Click Plus PLC MQTT Communication
We will be installing a windows based broker called Mosquitto. The Click Plus PLC will be one of the clients publishing and subscribing to the MQTT broker. Node-RED will be the other client publishing and subscribing to the MQTT broker. Each client will share information. Let’s get started.