Tag Archives: Productivity 1000 Series PLC Establishing Communication

Productivity Suite PLC Simulator Software Free Download


The productivity suite software now contains a plc simulator. The software is a free download and is available from automation direct. This software will now allow you to test or troubleshoot your program without the physical hardware present. The entire family of controllers can use the simulator. P1000, P2000, and P3000 emulation can happen on the following parts of the productivity series hardware:
– P1000 CPU’s and local I/O stack, P2000 and P3000 CPU’s and local bases
– All basic I/O modules, both analog and digital
– Modbus TCP Server/Client connections on external Ethernet port
Productivity Suite PLC Simulator Software Free Download
The simulation mode is available on the Productivity Suite version 3.8.x.x or higher. We will be discussing the PAC (Programmable Automation Controller) PLC Simulator. Testing this simulator will be done using our first program (Start-Stop Circuit) and the PID instruction in our Productivity 1000 series. We will also be connecting to physical hardware after using our simulator to test the program. Let’s get started. Keep on Reading!

Productivity 1000 Series PLC First Program

Last time we connected the Productivity 1000 Series PLC with our computer running the Productivity Suite Software. A micro USB and an Ethernet (RJ45) communication link was made to our programmable logic controller. We will now create our first program for our Productivity 1000 Series PLC. Our program will be a simple start stop circuit for a motor. Here is a post that will explain the logic behind our program circuit.
https://accautomation.ca/how-to-make-a-start-stop-jog-circuit-in-a-plc/
The latest Productivity Suite software version is 3.1.0.11. This is the programming software that we will be using to create our logic for control.

Let’s get started. Continue Reading!

Productivity 1000 Series PLC Establishing Communication

We will be connecting the Productivity 1000 Series PLC with our computer running the Productivity Suite Software. A micro USB and an Ethernet (RJ45) communication link will be made to our programmable logic controller.
The latest Productivity Suite software version is 3.1.0.11. This is the programming software that we will be using to create our logic for control.

Let’s get started. Continue Reading!