Category Archives: PLC

EasyPLC – Installing the Software

EasyPLC Software Suite is a complete PLC, HMI, and Machine Simulator Software package. This PLC learning package includes the following:
Easy PLC – PLC Simulation that will allow programming in Ladder, Grafcet, Logic Blocks, or Script.
HMI System – Easily create a visual human-machine interface (HMI)
Machine Simulator – A virtual 3D world with real-time graphics and physical properties. PLC programs can be tested using the EasyPLC or through other interfaces. (Modbus RTU, TCP, etc.)
Machine Simulator Lite – Designed to run on Android Devices.
Machine Simulator VR – Virtual Reality comes to life so you can test, train or practice your PLC programming.
EasyPLC Installing the Software
We will be installing the software and showing you how to order your software package for machine simulation (MS). This includes activating your license. Let’s get started. Keep on Reading!

PLC Learning Series – Memory Backup

PLC memory is very similar to personal computer memory. There is the operating system and firmware of the processor and connected modules. PLC programs and data that are used by the program are also stored in the memory.

We will now look at the basic understanding of memory in the PLC. Looking at two examples of PLC specifications. We will see how the program is stored and how long data memory will remain when the PLC is not powered up. Let’s get started. Keep on Reading!

Solo SL-SOFT Installation – Temperature Controller Software

All Solo Standard Process Temperature Controllers that support RS-485 serial communications can use the SL-SOFT configuration and monitoring software. This free package will communicate to monitor multiple SOLO controllers using Modbus RTU or Modbus ASCII protocols.

We will be installing the SL-SOFT configuration and monitoring software package on our Windows 10 PC. Communicating through our Waveshare USB to RS485 adapter, Modbus RTU will be used as the protocol to establish communication. Let’s get started. Keep on Reading!

PLC Learning Series – What are Outputs?

PLC outputs are the next component of our PLC block diagram. The outputs of the PLC will be controlled by the PLC program. Controlling outputs is one way to get the inputs to change. We will be looking at digital and analog outputs that can be wired to the programmable logic controller.

PLC troubleshooting outputs will also be discussed. This will be done using a multimeter measuring voltage both at the PLC output and across the discrete output load. We will also measure and control an analog signal output. Let’s get started. Keep on Reading!

Productivity 1000 Series PLC P1-RX Remote Slave

You can add a remote PLC slave rack of productivity 1000 series modules using a P1-RX. Up to 4 remote I/O base controllers can be added to the P1000 system.
We will be updating our P1-540 CPU unit to a P1-550 CPU in order to take advantage of remote IO. A P1-RX remote IO-based controller will be added and configured. Let’s get started. Keep on Reading!