Tag Archives: machine simulator

EasyPLC Simulator Robotic Cell Click PLC


The Machine Simulator (MS) is part of the EasyPLC software suite. It has many built-in machines that are used to show different programming techniques. The robotic cell example is one of these machines. This will demonstrate a sequencer example. In this case, an engine is lifted and placed onto a rack. The logic will step through various steps to perform the task.
EasyPLC Simulator Robotic Cell Click PLC
We will be using a Click PLUS PLC and the Click programming software to program this EasyPLC machine simulator engine loader of the robotic cell. This will be done using Modbus TCP (Ethernet) for communications. The program will allow you to start, stop and jog the sequencer. Using the five steps for program development, we will show how this sequencer is programmed. Let’s get started. Keep on Reading!

EasyPLC Simulator Productivity PLC Robotic Cell


The Machine Simulator (MS) is part of the EasyPLC software suite. It has many built-in machines that are used to show different programming techniques. The robotic cell example is one of these machines. This will demonstrate a sequencer example. The logic will step through different steps in order to perform the task. In this case, an engine is lifted and placed onto a rack.
EasyPLC Machine Simulator Productivity PLC Robotic Cell
We will be using a Productivity Suite Programming Simulator to program this engine loader of the robotic cell. This will be done using Modbus TCP (Ethernet) for communications. Using the five steps for program development we will show how this sequencer is programmed. Let’s get started. Keep on Reading!

Click PLC EasyPLC Warehouse Stacker Example


The Machine Simulator (MS) is part of the EasyPLC software suite. It has many built-in machines that are used to show different programming techniques. The warehouse stacker example is one of these machines. Pallets are loaded and unloaded into the stacker machine. A maximum of 30 pallets can be stored. The stacker will work as a FIFO (First In First Out) device. This means that the pallets are stored in a sequence and retrieved in a sequence.
Click PLC EasyPLC Warehouse Stacker Operation
The Click PLC will be used to program this virtual 3D stacker machine. Indirect addressing (pointers) will be used to track the positions on the stacker to store and retrieve the pallets. Using the Click Plus PLC, we will connect to the warehouse stacking machine. This will be done using Modbus TCP (Ethernet) for communications. Using the five steps for program development we will show how this FIFO is programmed. Let’s get started. Keep on Reading!

EasyPLC Software Suite – Quick Start


The EasyPLC Software Suite is a complete PLC, HMI, and Machine Simulator. The purpose of this quick start is to help you quickly learn this software suite. The manual that comes with EasyPLC Software Suite can always be referenced when required.
EasyPLC Quick Start Software Suite
EasyPLC Quick Start Software Suite
We will be using the simple conveyor in the machine simulator. The EasyPLC PLC will be used to program the ladder logic for this simple conveyor. Compiling and transferring the program to the EasyPLC Virtual CPU, we will then demonstrate the control of the conveyor. An HMI will also be programmed to indicate the direction of the conveyor. Let’s get started. Keep on Reading!

Click PLC Simple Conveyor EasyPLC


The Machine Simulator (MS) is part of the EasyPLC software suite. It has many built-in machines that can be programmed. A simple conveyor is one of these machines. This is usually the starting point for learning about the machine simulator. This conveyor example will use two digital inputs and two digital outputs. A pallet will move back and forth on the conveyor. When the pallet is detected on each end it will stop and reverse direction. If both motors are started at the same time, the motors will burn up. This will be demonstrated. The machine simulator will allow you as the programmer to make mistakes before trying your program in the physical world.
Click PLC Simple Conveyor EasyPLC
The Click PLC will be used to program this virtual machine. Using the Click Plus PLC, we will connect the simulator to the simple conveyor machine. This will be done using Modbus TCP (Ethernet) for communications. Using the five steps for program development we will show how this is programmed. Let’s get started. Keep on Reading!

Click PLC EasyPLC Gantry Simulator


The Machine Simulator (MS) is part of the EasyPLC software suite. It has many built-in machines that can be programmed. The gantry loader is one of these machines. It will pick up metal boxes from a conveyor and place two on a wooden pallet. The Click PLC will be used to program this virtual machine.
Click PLC EasyPLC Gantry Simulator
Using the Click Plus PLC, we will connect the simulator to the gantry loader machine. This will be done using Modbus TCP (Ethernet) for communications. Using the five steps for program development we will show how this is programmed. The logical sequence step will include a flow chart and a sequence of operations. The sequence of operations will be done using indirect addressing in the Click PLC. Let’s get started. Keep on Reading!