# Productivity 1000 Series PLC Math Instructions

Math instructions are used to perform mathematical calculations. The Productivity 1000 Series PLC has math instructions that can be used in a wide variety of applications. We will be looking at the Data Statistics (DATA) and the Math Editor (MATH).

Your automation system that you implement may involve these instructions. As a system integrator you will require the use of these instructions in your commissioned programs.
Let’s get started with the Productivity 1000 Series PLC Math Instructions. Continue Reading!

# Productivity 1000 Series PLC Counter Instructions

A majority of programmable logic controller (PLC) programs will include a counter instruction. The Productivity 1000 Series PLC has a couple of different counter instructions for your program. Under the data handling instructions we have the increment / decrement instruction (INC). We could use this with the compare contact (CMP) instruction that we discussed in our Contact and Coil Instructions (Video) to create a counter application.

The productivity suite software has a Simple Counter (SCNT) and the Counter (CNT) instructions. We will be reviewing these instructions and looking how to implement then in our ladder logic program. Let’s get started. Continue Reading!

# Productivity 1000 Series PLC Timer Instructions

Just about every programmable logic controller (PLC) program will include a timer instruction. The Productivity 1000 Series PLC has several different timer instructions for your program. We discussed the timed coil (TMC) and flasher coil (FLS) last time as part of the contacts and coil discussion. (Contact and Coil InstructionsVideo)

We will now look at using the Simple Timer (STMR) and the Timer (TMR) instructions in the productivity suite software. Let’s get started. Continue Reading!

# Productivity 1000 Series PLC Contact and Coil Instructions

The Productivity Suite Software consists of more than 82 instructions divided into 13 categories for the PLC. Contacts and Coils are two of the categories of instructions. Contact instructions include NO / NC, NO Edge / NC Edge and Compare. Coil instructions include Out, Set, Reset, OR Out, Flasher, Debounce, Timed, Toggle, Program End and No Operation.

We will be looking at these instructions in the Productivity 1000 series PLC. Adding to our favorite instructions helps us to organize the instructions. We will also look at organizing your favorite instructions. Let’s get started. Continue Reading!

# Productivity 1000 Series PLC Online Editing and Debug Mode

The Productivity Suite Software allows us to modify our existing program and execute the new code without stopping the scanning of the PLC. This is referred to as online editing. We change the ladder logic code and when we save it to the PLC, the current scan of the PLC is held until the new code is written into the unit. It then releases the scan and our new program start to execute. This happens in milliseconds so our process can continue to operate.
Troubleshooting the logic in our PLC sometimes can be difficult. The Productivity Suite Software has a Debug Mode. This will allow us to control the scan cycle of the PLC, decide on the rungs to execute and control the physical outputs during this time. This ability of control helps to fix errors or understand existing code in our programmable logic controller.
We will be taking our existing Start / Stop circuit from last time and add a Jog input using online editing. We will then use the debug mode in the Productivity Suite software to understand the scan and the jog function that we added.
Let’s get started. Continue Reading!

# Productivity 1000 Series PLC Monitoring and Testing the Program

The Productivity Suite Software provides tools for us to monitor and test our programs. Last time we used Tag Names and Details, Task Names and Descriptions, Rung Comments and Instruction comments to document our first program and transferred this to our connected Productivity 1000 Series PLC. We will be monitoring our ladder using the ladder editor window and display the information two different ways. Data View is a powerful tool to help us to test and view our program. We will be forcing the IO, toggling the IO view and graphing our tags to test our PLC logic circuit.
Let’s get started. Continue Reading!

# Productivity 1000 Series PLC Establishing Communication

We will be connecting the Productivity 1000 Series PLC with our computer running the Productivity Suite Software. A micro USB and an Ethernet (RJ45) communication link will be made to our programmable logic controller.
The latest Productivity Suite software version is 3.1.0.11. This is the programming software that we will be using to create our logic for control.

Let’s get started. Continue Reading!