ACC Automation: PLC & Industrial Control Learning
Practical Tips and Techniques
Using Visual Basic 2015, we will log three holding registers from the PLC, along with the time and date, into a Microsoft Access Database. We will log every minute to the database, including the information we collect from the PLC via Modbus TCP (Ethernet). All code will be done and shown so you can implement … Read more
Modbus RTU will be the serial (RS485) method in which we will communicate between the AdvancedHMI Screen and the Automation Direct Solo Process Temperature Controller. We can address up to 247 (Solo 1 to 247) devices on this master-slave protocol. A maximum of 32 devices (Nodes) on the network can communicate to the master. A … Read more
The SOLO Temperature Controller is a single-loop dual-output process temperature controller that can control both heating and cooling simultaneously. It is available in 1/32, 1/16, 1/8, and 1/4 DIN panel sizes and is UL, CUL, and CE-approved. There are four types of control modes: PID (Auto Tuning (AT) function) – Solo Control Modes P stands … Read more
We will be installing a USB to rs485 installation on our computer. The USB-485M is a 2-wire USB to RS-485 serial communication adapter for RS485 use. It does not require an external power supply or complicated configuration. It has a Type A (plug) USB connector for the computer side and a universal female RJ45/RJ12 … Read more
We will be creating an HMI (human machine interface) login screen for the cylinder program that we developed previously. BUILDING A PLC PROGRAM THAT YOU CAN BE PROUD OF – PART 6 Our program had a Run, Jog and Teach mode for the cylinders. Our user will login with a user name and password. Based … Read more
People often ask “What is a PLC?” and “PLC Meaning”. A programmable logic controller (PLC) is a piece of hardware that isolates inputs from outputs. Programs are written to look at the inputs solve logic and set the outputs to perform work. Today we are going to look at the basic fundamental way we program. … Read more
We will continue the series by looking at a sequencer controlling seven cylinders that can be taught. The cylinders can be operator programmed from the AdvancedHMI screen. You will be able to select what cylinders to activate at each step and program in 500 steps. Our PLC will be the Do-More from Automation Direct. Here … Read more
I have been recently asked how you can move data conditionally on an excel spreadsheet once the information has been obtained from the PLC? Monthly data was being collected from the PLC and put on an excel spreadsheet using Omron CX-Server DDE. They wanted at the beginning of each month to move the data to … Read more
We will now look at the Game of Simon for our part 5 in this series of building a PLC program. Learning all about bit manipulation and sequencers Simon is a memory game introduced in 1978. It has four colored buttons, each producing a particular tone when it is pressed or activated by the device. … Read more
We will now create a PLC with HMI Training and learning environment. We will use the Automation Direct Do-More programming software tied into the Advanced HMI learning package via Modbus TCP. All of the software is free and fully functional. Learn PLC programming and use a powerful HMI (Human Machine Interface) easily and freely. Setting … Read more