ACC Automation: PLC & Industrial Control Learning
Practical Tips and Techniques
The BRX PLC uses the Do-More Designer software which can be downloaded free of charge and includes a simulator. The latest Do-More Designer software version is 2.0.3. This is the same software that we used in the Learn PLC Programming Fee Video Series. The Do-More Designer software can be used to program the whole series … Read more
The BRX Do-More series of programmable logic controllers is a stackable micro brick. This is sometimes also referred to as a shoebox PLC because of the shape and way in which expansion modules are added. This new BRX Do-More series PLC is the latest in the Do-More series of controllers that have hit the market. … Read more
The data control instructions in the Omron CP1H programmable logic controller are used to manipulate the outputs based upon control conditions. Control is the main purpose of these instructions within the PLC. Instructions include PID (Proportional, Integral, and Derivative), PID with Autotuning, Dead Band Control, Limit, Dead Zone Control, Time Proportional Output, Scaling, etc. We … Read more
The Omron CP1H programmable logic controller has several different table data processing instructions. These instructions are used to handle table data, stacks and other ranges of data. We can define a stack of data. With this data we can then do the following: add new data by pushing onto the stack, use FIFO (First In … Read more
The Omron CP1H programmable logic controller has several different ways to control the program and the way in which your program executes. Sequence control, Subroutines, and Step instructions can be used. These are just a few ways in which the controller will execute your logic using a synchronous PLC scan. Understanding the PLC program scan … Read more
We will now look at data conversion instructions in the Omron Cp1H Controller. Programmable logic controller programming is all about manipulating the bits within the memory of the controller. Sometimes we need to convert from one form to another. This is where we will use data conversion instructions. BCD to Binary, Line to Column, Grey … Read more
Programmable logic controllers are not typically known for their math ability. Modern PLC controllers now come with several math instructions to expand the ability to perform math routines. Every controller has different methods to handle math with different numbering systems. Binary, BCD (Binary Coded Decimal), and floating-point single and double are examples of some numbering … Read more
We will now look at data shifting instructions in the Omron CP1H controller. PLC programming is all about how we can manipulate the information stored in the PLC. We have already looked at timers, counters, moves, and comparison instructions. Data shifting is a different concept that will move bits and words around in memory. This … Read more
We will create a simple and inexpensive analog voltage tester for a PLC using a potentiometer and a 9VDC battery. The potentiometer will be 5K ohms. This should be enough impedance for most analog inputs of the programmable logic controller. (PLC) Voltage impedance for analog voltage inputs is in the megaohm range where the current … Read more
We will now look at the compare instructions available on the Omron CP1H controller. Just about every program usually has some data comparison instruction. This is the ability to compare information from one area of the controller to another and act on results. The Omron CP1H series of programmable logic controllers provide several different ways … Read more