EasyPLC Software Suite is a complete PLC, HMI, and Machine Simulator Software package. This PLC learning package includes a Machine Simulator (MS). This virtual 3D world with real-time graphics and physical properties can communicate to several different programmable logic controllers. (PLC)
We will be developing a Click PLC program for a transfer line. This is just one of the prebuilt machines in the simulator to learn PLC programming. We will be developing the ladder logic, connecting via Modbus RTU, and testing our program. This will be done using the five steps to PLC program development. Let’s get started! Keep on Reading!
PLC outputs are the next component of our PLC block diagram. The outputs of the PLC will be controlled by the PLC program. Controlling outputs is one way to get the inputs to change. We will be looking at digital and analog outputs that can be wired to the programmable logic controller.
PLC troubleshooting outputs will also be discussed. This will be done using a multimeter measuring voltage both at the PLC output and across the discrete output load. We will also measure and control an analog signal output. Let’s get started. Keep on Reading!
Many questions come from serial communications using the Click PLC. Most of these questions deal with communication timing when using multiple send and receive instructions. We will show you how to deal with serial communication timing in the Click PLC.
Receive and Send instructions will allow you to send and receive serial data to an external device. The communication method that you set up can be ASCII or Modbus. ASCII (American Standard Communication for Information Interchange) can be used to send to devices such as a printer. Receiving ASCII can be used for connecting barcode scanners to the PLC. The barcode will be read as an ASCII string in the PLC. Modbus serial communication (Modbus RTU) is a standard protocol used in many automation devices.
We will demonstrate the Send and Receive instruction by communicating Modbus RTU to a Solo Temperature Controller. Parameters from the Solo process temperature controller will be read using multiple receive instructions. The send instruction will be used multiple times as well to set the Set Value (SV) and Limits of the SV value entered in the temperature controller. The set values will only be changed when required. Let’s get started. Keep on Reading!