ACC Automation: PLC & Industrial Control Learning
Practical Tips and Techniques
The SOLO Temperature Controller is a single loop dual output process temperature controller that can control both heating and cooling simultaneously. It is available in 1/32, 1/16, 1/8, and 1/4 DIN panel sizes and is UL, CUL and CE approved. The name of the temperature controller is deceiving. This unit will also accept voltage and … Read more
The Omron CP1H programmable logic controller has several different table data processing instructions. These instructions are used to handle table data, stacks and other ranges of data. We can define a stack of data. With this data we can then do the following: add new data by pushing onto the stack, use FIFO (First In … Read more
The Omron CP1H programmable logic controller has several different ways to control the program and the way in which your program executes. Sequence control, Subroutines, and Step instructions can be used. These are just a few ways in which the controller will execute your logic using a synchronous PLC scan. Understanding the PLC program scan … Read more
Previously we used VB6 (Visual Basic 6) to implement the Omron Host Link Protocol to communicate to our programmable logic controller. (PLC) In part 2 we used Visual Basic for Applications (VBA) to accomplish our host link serial communication. We will now look at using VB.Net to establish and retrieve information in and out of … Read more
We will now look at data conversion instructions in the Omron Cp1H Controller. Programmable logic controller programming is all about manipulating the bits within the memory of the controller. Sometimes we need to convert from one form to another. This is where we will use data conversion instructions. BCD to Binary, Line to Column, Grey … Read more
Programmable logic controllers are not typically known for their math ability. Modern PLC controllers now come with several math instructions to expand the ability to perform math routines. Every controller has different methods to handle math with different numbering systems. Binary, BCD (Binary Coded Decimal), and floating-point single and double are examples of some numbering … Read more
We will now look at data shifting instructions in the Omron CP1H controller. PLC programming is all about how we can manipulate the information stored in the PLC. We have already looked at timers, counters, moves, and comparison instructions. Data shifting is a different concept that will move bits and words around in memory. This … Read more
We will create a simple and inexpensive analog voltage tester for a PLC using a potentiometer and a 9VDC battery. The potentiometer will be 5K ohms. This should be enough impedance for most analog inputs of the programmable logic controller. (PLC) Voltage impedance for analog voltage inputs is in the megaohm range where the current … Read more
We will now look at the compare instructions available on the Omron CP1H controller. Just about every program usually has some data comparison instruction. This is the ability to compare information from one area of the controller to another and act on results. The Omron CP1H series of programmable logic controllers provide several different ways … Read more
We will now look at wiring interposing relays to connect an NPN and PNP sensors into the PLC. Interposing relay means a device that will separate two different circuits. The isolation can be for current consumption, voltage differences, voltage references, or a combination of both current and voltage. We can use these relays to help … Read more