Practical Tips and Techniques
We will now be looking at how to use analog inputs to our Arduino UNO controller. An analog input converts a voltage level into a digital value. This can then be used in our Arduino program or sketch. The analog input signal can represent many different items. Speed, levels, distance, brightness, density, humidity, etc. are … Read more
We will now utilize Ethernet/IP to connect a Click PLC as remote IO on a Productivity system. The productivity series of controllers can use explicit and implicit messaging techniques of EtherNet/IP to optimize data exchanges across the network. Explicit messaging means that the data messages that are transmitted will contain everything needed in order to … Read more
We will look at the BRX Do-More FTP (File Transfer Protocol) on our PLC. Using FTPGET and FTPPUT instructions we can transfer files to an FTP server. Our BRX Do-More PLC now has the ability to be an FTP Client. This will allow us to transfer our logged files to an FTP server that we … Read more
We will now be looking at using digital inputs (pushbuttons) to turn LEDs on and off. This will be programmed using our Arduino Uno R3 from our Super Starter Kit. Pushbuttons will allow actions to be performed that our Arduino program sketch will interpret and take action. We will be wiring two pushbutton switches. A … Read more
We will now connect our Productivity Open P1AM Arduino to a Click PLC. Using Modbus TCP the Arduino will be the Client (Master) and the Click will be the Server (Slave). We will explain how to connect our P1AM-ETH Industrial Arduino Ethernet Shield to the Click PLC. The protocol will be Modbus TCP on an … Read more
We will now look at creating BRX Do-More dynamic web pages on our PLC web server. These pages are great for operator information display. A dynamic web page is a web page that displays different content each time it’s viewed. For example, the page may change with the time of day, the user that accesses … Read more
