ACC Automation: PLC & Industrial Control Learning
Practical Tips and Techniques
We will now configure and operate Analog inputs and outputs on our BRX Do-More controller. One of the features of the BRX Series PLC is the ability to expand its capability to fit your application. This is easily done by “snap-on” modules that will fit on the side of the BRX MPU (Multi-Processor Unit). As … Read more
ACC Automation We would like to take a few minutes and reflect on the past, current and future of ACC Automation. 2017 has been our best year yet thanks to you. Your questions, comments and suggestions have helped us to build the site that you see today. Thank you.
We will now look at using serial Modbus RTU to communicate with a Solo process temperature controller using our BRX Do-More Controller. Serial communication instructions will allow you to send and receive serial data to an external device. The communication method that you set up can be ASCII or numeric (binary). ASCII (American Standard Code … Read more
Recently I was asked to demonstrate communication between a BRX PLC and Click PLC using Modbus RTU. Both PLCs are available from automation direct com. Modbus serial communication (Modbus RTU) is a standard protocol used in many automation devices. It works on a Master / Slave configuration. You can have only one master per network … Read more
The BRX Do-More series of programmable logic controllers has built in high speed inputs and outputs. Every CPU will have either 6 or 10 high speed inputs (HSI) available depending on the model. These inputs can be used for input frequencies from 0 to 250Khz. 250Khz represents 250000 input counts per second that can be … Read more
We will now use Modbus RTU to connect a Click Master to a BRX Do-More Slave controller. Recently I was asked to demonstrate communication between a Click PLC and BRX Do-More PLC using Modbus RTU. Both PLCs are available from automation direct com. Modbus serial communication (Modbus RTU) is a standard protocol used in many … Read more
We will now use the Do-More Designer software to establish communication with the BRX Do-More PLC. This is the same software that we used in the Learn PLC Programming Fee Video Series. Using the Do-More Designer software, we will communicate via USB, RS485, and Ethernet. These three methods will allow us to communicate to our … Read more
The BRX Do-More series of programmable logic controllers is a stackable micro brick. This is sometimes also referred to as a shoebox PLC because of the shape and way in which expansion modules are added. This new BRX Do-More series PLC is the latest in the Do-More series of controllers that have hit the market. … Read more
PLC Beginner’s Guide to PLC Programming There are many different PLC manufacturers with other hardware and software. All of the programmable logic controllers have similar basic features. Here is how I would approach learning about basic PLCs. What is a PLC? (Programmable Logic Controller) – Video Top 7 problems with beginners using ladder logic – … Read more
We will create a simple and inexpensive analog voltage tester for a PLC using a potentiometer and a 9VDC battery. The potentiometer will be 5K ohms. This should be enough impedance for most analog inputs of the programmable logic controller. (PLC) Voltage impedance for analog voltage inputs is in the megaohm range where the current … Read more